JFX600-2513 Large format UV-LED Flatbed inkjet printer
Up to 330% faster print speed than JFX500 for improved productivity.
Six colors available, including light colors.
The UV inks for the both models are certified as GREENGUARD Gold due to their environmental friendliness
MPC using a graphical user interface.
Designed with usability in mind: table size & vacuum table, supporting media as thick as 60 mm.
Incorporation of the reliable Mimaki technology.
Variable expression to add more value to prints.
Support for “MDL commands” achieves automation and labor saving of printing process such as workpiece transfer.
|Irregular shapes||Furniture||Furniture||Display case|
|Indoor advertisement||Outdoor advertisement||Bathroom||Wall display|
|Hard UV ink||Flexible UV ink *¹|
|C, M, Y, K, Lc, Lm, W, Cl, Pr *²||C, M, Y, K, Lc, Lm, W, Cl, Pr *²||C, M, Y, K, Lc, Lm, W, Cl, Pr *³|
|The LH-100 ink has a high scratch/chemical resistance and an accurate color reproducibility. This ink is suitable for rigid materials.||The LUS-120 ink has 170% stretchability after curing. Its ink film is very flexible and will not crack during post print processes.||The LUS-150 ink has 150% stretchability after curing and will not crack during post print processes. This ink is compatible with a wide range of materials and has a low degree of tackiness.|
Waveform control: Thanks to Mimaki's unique advanced ink droplet ejection control, droplets with high circularity can be ejected to make them accurately land on the media. This enables sharp expression of text, ruled lines, and edges.
MAPS4 (Mimaki Advanced Pass System 4): Banding (horizontal stripes), uneven color, and glossy streaks can be reduced to realize smooth prints by printing pass boundaries fading in gradation.
Variable dots: Three different ink dot sizes are used to enable high-quality prints with reduced graininess.
|Head||On-demand Piezo head|
16 printheads (4x4 lines in a staggered layout)
|Print resolution||600, 1,200dpi|
|Ink||Type||UV curable ink : LUS-120 (C, M, Y, K, Lc, Lm, W, Cl)|
|UV curable ink : LUS-150 (C, M, Y, K, Lc, Lm, W)|
|UV curable ink : LUS-210 (C, M, Y, K, W, Cl) *Only available in specific countries|
|UV curable ink : LH-100 (C, M, Y, K, Lc, Lm, W, Cl)|
|Ink Supply system||Supplied from 1-liter bottles for each color|
|Ink circulation system *1||White ink circulation using Mimaki Circulation Technology (MCT)|
|Maximum diagram dimensions (W×D)||2,500×1,300 mm (98.4×51.2")|
|Media||Dimensions (W×D)||Up to 2,500×1,300 mm (98.4×51.2")|
|Height||Max. 60 mm|
|Weight||Less than 50 kg/m2 (110.2 lb./ft2), non concentrated load|
|Media absorption||Blower adsorption type + foot switch|
|Number of absorption area partitions||2 partitions (X-axis direction)|
|Curing device||LED-UV system|
|Safety standard||UL 775 ETL / CE Marking (EMC, Machinery directive, and RoHS) / REACH / EAC|
|Power supply||(Single phase, AC200-240V±10%, 50/60Hz±1Hz, 24 A) ×3|
|Power consumption||INLET1 to 3 | Each INLET: Less than 4.8 kVA|
|Installation environment||Temperature||20 – 30 °C (68 – 86 °F)|
|Relative humidity||35 - 65％Rh (Non condensing)|
|Accuracy maintained temperature||20 – 25 °C (68 – 77 °F)|
|Temperature gradient||Less than ± 10 °C/h (± 18 °F/h)|
|Dust||Similar to standard office environments|
|Assembled Dimensions (W×D×H)||5,270×2,800×1,600 mm (207.5×110.2×63.0")|
|Weight||1,100 kg (2,425 lbs.) or less|
Some of the screens and printing samples in this website are artificial renderings.
Specifications are subject to change without notice.
All trademarks or registered trademarks are the property of their respective owners.
Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.
Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.
Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
In addition, please read the instructions and guidelines of the manual carefully and follow those.
ADD：Unit 1B, 17/F Kwong Sang Hong Centre, No. 151-153 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong.
Tel：China +86 0769 22307900 / HongKong +852 3622 5561
Fax：China +86 0769 22307900 / HongKong +852 3694 6903